Science & Technology

How do I activate Secure Boot on PC to install Windows 11

Windows 11 requires Secure Boot and, in this article we’ll walk you through how to enable and check the feature.

In addition to the system’s requirements, along with a Trusted Platform Modulator (TPM) device must also be equipped with “Secure Boot” enabled to install Windows 11. The Most common error occurs that last line no longer available. Here is Guide to Fix in simple Ways.

Secure Boot is a security feature on modern devices that run UEFI firmware that provides an environment that is secure to boot Windows and to stop malware from stealing your system in the process of booting. Also, Secure Boot allows the computer to start only when it is using reliable software from the Original Equipment Maker (OEM).

The advantage for this new feature would be that it provides a more secure experience. This is among the main reasons Microsoft has made it a prerequisite to install Windows 11. The only issue is that turning on this feature is going to make it impossible to run other operating systems, such as Linux.

This Windows 11 guide, we will guide you through the steps needed to make sure you are able to allow Secure Boot to upgrade a Windows 10 computer.

How do you verify the Secure Boot state on Windows 10

To verify for the Secure Boot state on Windows 10 Use these steps:

  1. Open Start.
  2. Find System Information and click the top result to launch the application.
  3. Select System Summary in the left side.
  4. Make sure to check for the “Secure Boot State” details:

O On — indicates that the feature is activated.

Off — means that the feature is disabled or is not enabled.

Source: Windows Central

  1. Review your “BIOS Mode” details:

o UEFI — indicates you can enable Secure Boot.

or Legacy (BIOS) This means you are able to enable the feature, however it requires additional steps.

After you’ve completed these steps and “Secure Boot State” is off and the it is in BIOS Mode is set as UEFI follow the steps listed below to create an enhanced security experience and meet Windows 11 requirements.

If “Secure Boot State” is disabled as well as “BIOS Mode” to Legacy If you’re looking to backup your system, follow these steps to convert your installation of MBR into GPT and then proceed with the steps necessary to allow Secure Boot.

How do I change MBR into a GTP drive in Windows 10

If you intend for a change from Windows 10 to Windows 11 on older hardware that can support UEFI, you first need to change the drive from the old MBR partition style into GPT so that you can switch the correct type of system firmware. In the event that it is not done, your computer won’t start properly.

If you are running Windows 10, you can utilize the MBR2GPT command-line tool to switch the type of partition to MBR or GTP without having to reinstall Windows.

Verify for partition styles like MBR or GPT.

To verify the style of the drive partition currently in use Follow these steps:

  1. Open Start.
  2. Find Disk Management and click the top result to launch the application.
  3. Right-click on the drive (where Windows 10 is installed) and then choose the option Properties.
  4. Click on the volume tab.
  5. In the “Partition type” field If the field reads GUID Partition Table (GPT) the drive will not require conversion. However, If you can notice that the Master Boot Record (MBR) label You can make use of the tool for conversion to change the label.
  6. Hit to the Cancel button.

After you have completed all the necessary steps you feel that the drive requires conversion, follow the steps outlined below.

Convert MBR into GPT partition style

To convert MBR into GPT partition style for Windows 10, use these steps:

  1. Open Settings.
  2. Click on Update & Secure
  3. Click on Recovery.
  4. Under the “Advanced start” section, select the Restart No
  5. Click th
  6. Go to Advanced options.
  7. Click the Command Pro
  8. Choose your administrator account and log in (if you have one).).
  9. Use below command, to verify that the drive is in compliance with the specifications and hit Enter:

mbr2gpt /validate

Quick tip: mbr2gpt.exe is located within the “System32” folder within”Windows. “Windows” directory. If you wish to view all options available then utilize the mbr2gpt/? command.

  1. Enter below command, to change your drive to GPT from MBR. Then hit Enter:

mbr2gpt /convert

  1. Press the close button.
  2. Click the turn off your PC button.

When you’ve completed these steps, the command-line program will alter the type of partition to GPT in order to satisfy the system requirements required to install Windows 11.

If the conversion was successful The return code will have the value of “0,” but if the process is unsuccessful you might encounter some of these error messages.

For more valuable information visit the website

Related Articles

Back to top button